Aqua-Computer Multiswitch USB 1.41 Version LT

The multiswitch LT is the ultimate controlling unit for your PC. It gets connected to your PC about USB and can be controlled over the enclosed aquasuite software. Its 8 main channels are able to switch electrical powers of 1A. E.g. you can can use it for the control of fans or cold cathodes. Besides the pure on/off turning it is also possible to dim these channels at the use of cold cathodes in 26 stages. Besides the 8 main channels another switching output with a potential-free relay output stands max. 24V, 4A is available. Another 8 dimmable channels are in addition available for LED effects. Altogether 17 channels can be controlled through the multiswitch.

Besides simply switching over the aquasuite software the channels can also be controlled with scripts. Effortful effects are therefore possible.

An interface to the optional connection of up to two aquastream controllers is integrated into the multiswitch LT. Over the enclosed Windows software the function status of the pump can be monitored as well as depending on controller revision and firmware the pumping power can be regulated (refer to the manual for further details).

Besides the use as a USB device the multiswitch LT can be connected with the aquaero over the aquabus. In this case it is controlled directly through the aquaero or out of the aquasuite.

In addition to the known functions it is possible here to use the channels of the multisiwitch LT as a bar graph.
Through this LEDs or cold cathodes can be used as a bar graph which shows the values provided by the aquaero like ventilation-performance, temperatures, flow rate etc.

The LT version of the multiswitch can be used for the internal installation. It offers the same functions as the "big brother", but it lacks the bay mount and the faceplate with its buttons. The LT version is controlled completely by USB through the enclosed aquasuite software.

As always the firmware of the multiswitch LT can be updated out of the aquasuite. Therefore further functions are feasible.

Test the aquasuite software with the demo-mode:
On our support site you can download the latest version of the aquasuite for free and start it in a demo-mode. In this mode your are able to see the menus and screens of the multiswitch.